Adding bridge interface for lxc containers
You can make a bridge by changing network configuration file:
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 |
# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 # iface eth0 inet dhcp # make this manual, that network manager would not conflict when you connect utp cable iface eth0 inet manual auto br0 iface br0 inet static bridge_ports eth0 address 192.168.1.10 broadcast 192.168.1.255 netmask 255.255.255.0 gateway 192.168.1.1 |
In this configuration I used br0 static configuration. If You need dhcp, You can use this configuration:
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 |
# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 # iface eth0 inet dhcp # make this manual, that network manager would not conflict when you connect utp cable iface eth0 inet manual auto br0 iface br0 inet dhcp |
