root@gibson:~# ▌
If You copy/clone Your machine, or change network card, on linux Your interfaces get names eth1, eth2, eth3 and so on.
Before makeing changes just delete /etc/udev/rules.d/70-persistent-net.rules file.
After first boot, network interfaces will be enumerated from zero again.
rm /etc/udev/rules.d/70-persistent-net.rules
License check failure See the Debug GuideReason: request failed: Post “https://licensing.directadmin.com/start”: x509: certificate has expired or is not yet valid: current time 2022-10-26T11:51:22+03:00 is after 2021-09-30T14:01:15Z The issue is likely due to server CA root certificates being too old. If you are using Centos 7 which is still supported –…
After debian install onto guruplug, I’ve noticed few errors: Also, neither Bluetooth nor Wifi were working. To be able to install the libertas firmare You must enable non-free software in Your apt source configuration: Append “non-free” to Your main deb sources to look like this: Now just run the apt-get…
Let’s hookup our GuruPlug JTAG board as described in GuruPlug serial connection post. Latest debian testing images for GuruPlug may be found here. Boot up the device: => usb start starting USB… USB0: USB EHCI 1.00 scanning bus 0 for devices… 4 USB Device(s) found scanning usb for storage devices……
Thank you. This was easier than changing all kinds of configs